C9200L-24P-4X-E

Out of stock
Only %1 left
SKU
C9200L-24P-4X-E
Cisco Systems C9200L-24P-4X-E Catalyst 9200L 24-port PoE+, 4 x 10G, Network Essentials

Cisco Systems C9200L-24P-4X-E

Main Specifications
Product DescriptionCisco Catalyst 9200L - Network Essentials - switch - 24 ports - rack-mountable
Device TypeSwitch - 24 ports - L3 - stackable
Enclosure TypeRack-mountable
SubtypeGigabit Ethernet
Ports24 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ (uplink)
Power Over Ethernet (PoE)PoE+
PoE Budget740 W
PerformanceStacking bandwidth: 80 Gbps Switching capacity: 128 Gbps Forwarding rate: 190.4 Mpps
CapacityVirtual networks: 1 IPv4 routes: 11000 IPv4 routing table entries: 3000 IPv6 routing table entries: 1500 Multicast scale: 1000 ACL scale entries: 1500 FNF entries: 16000 VLANs supported: 1024 Switched virtual interfaces (SVIs): 512 QoS hardware queues per port: 8
MAC Address Table Size16000 entries
Jumbo Frame Support9198 bytes
Routing ProtocolOSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
Remote Management ProtocolSNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
FeaturesQuality of Service (QoS), Cisco StackWise Technology, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Remote Switch Port Analyzer (RSPAN), NetFlow, Energy Efficient Ethernet, Management Information Base (MIB), Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, DiffServ Code Point (DSCP) support, MACsec support, 6MB packet buffer, Control plane protection (CoPP), Switched Port Analyzer (SPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR)
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at, IEEE 802.3bz
PowerAC 120/230 V (50 - 60 Hz)
Power RedundancyOptional
Dimensions (WxDxH)44.5 cm x 4.4 cm x 28.8 cm
Weight5.5 kg


Extended Specifications
General
Device TypeSwitch - 24 ports - L3 - stackable
Enclosure TypeRack-mountable
SubtypeGigabit Ethernet
Ports24 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ (uplink)
Power Over Ethernet (PoE)PoE+
PoE Budget740 W
PerformanceStacking bandwidth: 80 Gbps
Switching capacity: 128 Gbps
Forwarding rate: 190.4 Mpps
CapacityVirtual networks: 1
IPv4 routes: 11000
IPv4 routing table entries: 3000
IPv6 routing table entries: 1500
Multicast scale: 1000
ACL scale entries: 1500
FNF entries: 16000
VLANs supported: 1024
Switched virtual interfaces (SVIs): 512
QoS hardware queues per port: 8
MAC Address Table Size16000 entries
Jumbo Frame Support9198 bytes
Routing ProtocolOSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
Remote Management ProtocolSNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
FeaturesQuality of Service (QoS), Cisco StackWise Technology, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Remote Switch Port Analyzer (RSPAN), NetFlow, Energy Efficient Ethernet, Management Information Base (MIB), Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, DiffServ Code Point (DSCP) support, MACsec support, 6MB packet buffer, Control plane protection (CoPP), Switched Port Analyzer (SPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR)
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at, IEEE 802.3bz
RAM2 GB
Flash Memory4 GB


Expansion / Connectivity
Interfaces24 x 1000Base-T RJ-45 PoE+ - 30 W
4 x 10GBase-X SFP+ uplink
1 x network stack device
1 x management (LAN) RJ-45
1 x console RJ-45


Power
Power DeviceInternal power supply - hot-plug
Installed Qty2 (max)
Power RedundancyOptional
Voltage RequiredAC 120/230 V (50 - 60 Hz)


Miscellaneous
MTBF390,310 hours
Compliant StandardsCISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Part 15 B Class A, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35, EN 300386


Dimensions & Weight
Width44.5 cm
Depth4.4 cm
Height28.8 cm
Weight5.5 kg



Environmental Parameters
Humidity Range Operating5 - 90% (non-condensing)
Min Storage Temperature-40 ?C
Max Storage Temperature70 ?C
Humidity Range Storage5 - 90% (non-condensing)


Write Your Own Review
You're reviewing:C9200L-24P-4X-E

The lowest prices guaranteed

IP Supply provides the highest quality products at the lowest possible prices for our clients. Please contact us if you see a lower price and we guarantee to beat any genuine offer from a competitor.
 

Quality Guaranteed

Every second-user Cisco Systems device from IP Supply is fully refurbished. Accessories are then added as appropriate, and the unit is professionally re-packaged ready for despatch. The entire process takes under 24 hours. Nearly all of our pre-owned and refurbished network equipment is sold in a new or ‘as new’ condition. We can provide detailed reports on the condition of any item. See Our Testing procedures: 24-point Quality Control Program
 

Money-Back Guarantee

As long as your equipment is still covered by warranty, you can contact our customer service team to exchange or return any faulty product that you have purchased from us.
 

Flexible Secure Payment & Shipment

Depending on the size of your order, shipping will be done via Australia Post|FedEx | DHL | UPS | TNT | CourierPlease.

Major Payment Method Accepted: Visa/ MasterCard/ American Express/ PayPal.

365-day repair or replace warranty

  • Every piece of refurbished networking equipment sold by IP Supply is fully-guaranteed and comes with a 6-month warranty.
  • IP Supply warranties and returns are subject to acceptance of, and compliance with, IP Supply policies and procedures as described above and on IP Supply Online RMA form.
  • We offer an industry-leading 365-day warranty* on all of our refurbished products.

* Retail, end-user clients only. Wholesale clients are subject to a 30-day repair or replace warranty.

The Support Contacts

If your Cisco products experience a failure, you must contact your sales representative to verify the product issue. If the problem cannot be corrected by remote support methods i.e. email or phone support, the RMA process will commence immediately.

  • ipsupply_com_au (3241 RedStar)
  • Positive Feedback: 100.0% (last 12 months)
  • Member since: 5-Jan-10 in Australia
Recent Feedback ratings
  1 MONTH 6 MONTHS 12 MONTHS
add 1 6 25
tick 1 1 1
delete 0 0 0
Detailed Seller Ratings
CRITERIA AVERAGE RATING NUMBER OF RATINGS
ITEM AS DESCRIBED starstarstarstarstar 17
COMMUNICATION starstarstarstarstar 16
DISPATCH TIME starstarstarstarstar 16
POSTAGE AND PACKAGING CHARGES starstarstarstarstar 18
  FEEDBACK
add
Good buyer, prompt payment, valued customer, highly recommended.
 
tick
Received product that did NOT match the most important specification (to me) that was DISPLAYED in the supplied photo. P/Supply working.
 
add
A+++++
 
add
item arrived safely
 
add
Quick and easy transaction, highly recommended buyer!
 

Delivery Information

Our Logistic Partners

corporate
Useful Information about our shipping:
•    Item allocation for your order will usually take 1-3 business days depending on stock availability after your payment has been received
•    Shipping time will apply after the above mentioned period
•    Low cost – all items from your order are usually packed together for a convenient single delivery so that you can save on shipping                                
·     Shipping calculator with various delivery options for entire order is located on the shopping cart page

Payment Information

Major Payment Method Accepted:
 

• BPAY – No Fees
• Bank Transfer – No Fees
• Credit Cards – 1% transaction fee for VISA, MasterCard, 2% transaction fee for AMEX 
• PayPal – 1% transaction Fee

phone Call us Now
+61 2 8061 6886
Mon-Fri 8am-5pm
head phone Frequently Asked Questions
VIEW FAQ NOW
Quick answers to common questions
email Have Any Question?
EMAIL US
Click here to email us
Copyright © 2020 IP Supply Australia All rights reserved